| |
Effect of Angle of Hydrocyclone Inclination on Cut-Size
By
S. Banisi, H. Deghan-Nayeri and M.J. Habibyan
Published in
Interactions in mineral Processing, 40th Annual Conference of Metallurgists of CIM, August 26-29, 2001, Toronto, Ontario, Canada
at
2001
Direct link:
http://kmpchemmat.ir/pii/34731
Abstract
The influence of angle of hydrocyclone inclination on its cut size was studied in a specially designed laboratory rig equipped with a 75 mm Krebs cyclone. It was found that by increasing the angle of inclination of the cyclone, the cut-size increases. in particular for angles above 45° . For the low percent solids (10%) the effect of inclination was not significant. The relative increase in the cut-size for the angle of 900 and percent solids of 30% was found to be 24.5%. An increase of 10% in the percent solids increased the cutsize by 31 %. Based on 38 experiments an empirical model to predict the cut-size was proposed.
|
|